Comments on: TM M3 Super 90 CQB Mod Guide http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/ Travel writing, reviews, philosophy and airsoft Wed, 25 Jan 2012 15:07:00 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: Anonymous http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-12119 Anonymous Sun, 27 Mar 2011 12:10:00 +0000 http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-12119 Cool! www.outsidecontext.com *Sent from iPhone* Cool!

http://www.outsidecontext.com
*Sent from iPhone*

]]> By: Richierich http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-12118 Richierich Sun, 27 Mar 2011 10:56:00 +0000 http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-12118 i bought a TM M3 super 90,in bits for £20 it had the terminal damage,i tried to fix it but although i managed to put it back together,i just could not get it to feed properly. i then bought a fully working DE M56 dl second hand for £40,i used the internal mechanism of the DE,including hop,and inner barrels,and sliding stock,with the remaining externals of the TM,and now have a TM M3 shorty with a sliding stock for £60 i bought a TM M3 super 90,in bits for £20 it had the terminal damage,i tried to fix it but although i managed to put it back together,i just could not get it to feed properly.
i then bought a fully working DE M56 dl second hand for £40,i used the internal mechanism of the DE,including hop,and inner barrels,and sliding stock,with the remaining externals of the TM,and now have a TM M3 shorty with a sliding stock for £60

]]> By: bashomatsuo http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-11347 bashomatsuo Tue, 15 Jun 2010 15:49:02 +0000 http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-11347 This post has problems ATM, I will be fixing next week and updating the entire thing! Until then contact me if you need the images. This post has problems ATM, I will be fixing next week and updating the entire thing! Until then contact me if you need the images.

]]> By: Basho http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-10515 Basho Tue, 18 Aug 2009 17:02:53 +0000 http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-10515 Amazing work! Amazing work!

]]> By: Basho http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-11551 Basho Tue, 18 Aug 2009 17:02:00 +0000 http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-11551 Amazing work! Amazing work!

]]> By: t frost http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-10514 t frost Tue, 18 Aug 2009 12:53:51 +0000 http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-10514 dude... i decided to have a go at your mod, seeing as i have a soft spot for shotties... so i purchased a cheap china clone of the m90, happily it came with the slidey twisty adjustable stock pre-fitted. followed your tips and presto... nice small shotgun... but then... i made my first mistake... i watched predator 2... and saw danny g kick ass with a teeny weeny cut down shotty. and i wanted one for the tight confines of firefight london. so i made my second mistake... i took up my hack saw and chopped off the barrel and sheel tube, right through the inner barrels, about 1.5 inches in front of the fore grip. it looked ok but the 3 inner barrels were flapping around inside like crazy. i fished around inside the cut of sections and found a small plastic bung with 3 holes in it.. but how to fit it back in... so i made my third mistake... i unscrewed and unbolted every damn thing i could find til i had striped off the grip, racking arms, shell tube, outer barrel and racking guides.. i then unbolted the 3 barrel housing and hop assembly... this is suprisingly easy and quick to do... you just undo stuff til the gun goes "spoing". then you find all the peices. the upside was, i could then chop the inner barrels right down to 6 inches long only, using an 8 mm drill bit on slow to gently chamfer the insides of the barrels after to remove burrs..i then refitted the end bung, rebolted the housing and outer barrel, and put everything back together... then ii moved onto the stock, and removed it completely. i didnt want to replace it with the standard pistol grip becausei it ould cost money and i like the beaver tail look of the one fitted.. so i just unbolted the stock tube, chuckd it, and bolted the pistol grip back on... and ta da..... i now have a shotty which is only 20 inches long total... woo hooo.... i coldnt post any pics on your site obviosly, so i put a little slide show on youtube if you fancy a gander.. http://www.youtube.com/watch?v=NGMuqJzMKRo dude… i decided to have a go at your mod, seeing as i have a soft spot for shotties… so i purchased a cheap china clone of the m90, happily it came with the slidey twisty adjustable stock pre-fitted. followed your tips and presto… nice small shotgun…

but then… i made my first mistake…

i watched predator 2…

and saw danny g kick ass with a teeny weeny cut down shotty.
and i wanted one for the tight confines of firefight london.

so i made my second mistake… i took up my hack saw and chopped off the barrel and sheel tube, right through the inner barrels, about 1.5 inches in front of the fore grip. it looked ok but the 3 inner barrels were flapping around inside like crazy. i fished around inside the cut of sections and found a small plastic bung with 3 holes in it.. but how to fit it back in…

so i made my third mistake…

i unscrewed and unbolted every damn thing i could find til i had striped off the grip, racking arms, shell tube, outer barrel and racking guides.. i then unbolted the 3 barrel housing and hop assembly… this is suprisingly easy and quick to do… you just undo stuff til the gun goes “spoing”. then you find all the peices.

the upside was, i could then chop the inner barrels right down to 6 inches long only, using an 8 mm drill bit on slow to gently chamfer the insides of the barrels after to remove burrs..i then refitted the end bung, rebolted the housing and outer barrel, and put everything back together…

then ii moved onto the stock, and removed it completely. i didnt want to replace it with the standard pistol grip becausei it ould cost money and i like the beaver tail look of the one fitted.. so i just unbolted the stock tube, chuckd it, and bolted the pistol grip back on…

and ta da….. i now have a shotty which is only 20 inches long total…

woo hooo….

i coldnt post any pics on your site obviosly, so i put a little slide show on youtube if you fancy a gander..

]]> By: t frost http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-11550 t frost Tue, 18 Aug 2009 12:53:00 +0000 http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-11550 dude... i decided to have a go at your mod, seeing as i have a soft spot for shotties... so i purchased a cheap china clone of the m90, happily it came with the slidey twisty adjustable stock pre-fitted. followed your tips and presto... nice small shotgun... but then... i made my first mistake... i watched predator 2... and saw danny g kick ass with a teeny weeny cut down shotty. and i wanted one for the tight confines of firefight london. so i made my second mistake... i took up my hack saw and chopped off the barrel and sheel tube, right through the inner barrels, about 1.5 inches in front of the fore grip. it looked ok but the 3 inner barrels were flapping around inside like crazy. i fished around inside the cut of sections and found a small plastic bung with 3 holes in it.. but how to fit it back in... so i made my third mistake... i unscrewed and unbolted every damn thing i could find til i had striped off the grip, racking arms, shell tube, outer barrel and racking guides.. i then unbolted the 3 barrel housing and hop assembly... this is suprisingly easy and quick to do... you just undo stuff til the gun goes "spoing". then you find all the peices. the upside was, i could then chop the inner barrels right down to 6 inches long only, using an 8 mm drill bit on slow to gently chamfer the insides of the barrels after to remove burrs..i then refitted the end bung, rebolted the housing and outer barrel, and put everything back together... then ii moved onto the stock, and removed it completely. i didnt want to replace it with the standard pistol grip becausei it ould cost money and i like the beaver tail look of the one fitted.. so i just unbolted the stock tube, chuckd it, and bolted the pistol grip back on... and ta da..... i now have a shotty which is only 20 inches long total... woo hooo.... i coldnt post any pics on your site obviosly, so i put a little slide show on youtube if you fancy a gander.. http://www.youtube.com/watch?v=NGMuqJzMKRo dude… i decided to have a go at your mod, seeing as i have a soft spot for shotties… so i purchased a cheap china clone of the m90, happily it came with the slidey twisty adjustable stock pre-fitted. followed your tips and presto… nice small shotgun…

but then… i made my first mistake…

i watched predator 2…

and saw danny g kick ass with a teeny weeny cut down shotty.
and i wanted one for the tight confines of firefight london.

so i made my second mistake… i took up my hack saw and chopped off the barrel and sheel tube, right through the inner barrels, about 1.5 inches in front of the fore grip. it looked ok but the 3 inner barrels were flapping around inside like crazy. i fished around inside the cut of sections and found a small plastic bung with 3 holes in it.. but how to fit it back in…

so i made my third mistake…

i unscrewed and unbolted every damn thing i could find til i had striped off the grip, racking arms, shell tube, outer barrel and racking guides.. i then unbolted the 3 barrel housing and hop assembly… this is suprisingly easy and quick to do… you just undo stuff til the gun goes “spoing”. then you find all the peices.

the upside was, i could then chop the inner barrels right down to 6 inches long only, using an 8 mm drill bit on slow to gently chamfer the insides of the barrels after to remove burrs..i then refitted the end bung, rebolted the housing and outer barrel, and put everything back together…

then ii moved onto the stock, and removed it completely. i didnt want to replace it with the standard pistol grip becausei it ould cost money and i like the beaver tail look of the one fitted.. so i just unbolted the stock tube, chuckd it, and bolted the pistol grip back on…

and ta da….. i now have a shotty which is only 20 inches long total…

woo hooo….

i coldnt post any pics on your site obviosly, so i put a little slide show on youtube if you fancy a gander..

]]> By: Paul http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-10445 Paul Sat, 04 Jul 2009 19:50:55 +0000 http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-10445 Hi, great mod which was very clear and allowed me to sort my own shotgun, thanks! I can't find anything about the barrel repair and you said to ask as you've a printable version, is that something you couls send me please? Many Thanks! Paul. Hi, great mod which was very clear and allowed me to sort my own shotgun, thanks! I can’t find anything about the barrel repair and you said to ask as you’ve a printable version, is that something you couls send me please? Many Thanks! Paul.

]]> By: Paul http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-11549 Paul Sat, 04 Jul 2009 19:50:00 +0000 http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-11549 Hi, great mod which was very clear and allowed me to sort my own shotgun, thanks! I can't find anything about the barrel repair and you said to ask as you've a printable version, is that something you couls send me please? Many Thanks! Paul. Hi, great mod which was very clear and allowed me to sort my own shotgun, thanks! I can’t find anything about the barrel repair and you said to ask as you’ve a printable version, is that something you couls send me please? Many Thanks! Paul.

]]> By: HappiDave http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-10176 HappiDave Thu, 29 Jan 2009 07:09:48 +0000 http://www.outsidecontext.com/2007/06/06/tm-m3-super-90-cqb-mod-guide-2/#comment-10176 Great review & love the stock, had my m3 shorty about 3 years now & still going strong, such an underated gun! Thinking of doing some upgrades ie new piston heads if I can find some & maybe slightly stronger springs Great review & love the stock, had my m3 shorty about 3 years now & still going strong, such an underated gun!
Thinking of doing some upgrades ie new piston heads if I can find some & maybe slightly stronger springs

]]>